| Stock-No. |
1020-20211 |
| Category |
Bevel Gear Generator - Straight |
| Make |
GLEASON |
| Type |
104 CONIFLEX |
| New in |
1997 |
| Control |
Fanuc 0-GC |
| Location |
ab Werksstandort,unter Strom |
| Origin |
Belgien |
| Delivery time |
immediately |
| Freight basis |
ex works "is as is" |
| Price |
| max. wheel diameter |
216 mm |
| tooth width |
35 mm |
| max. module |
8,5 |
| min. module |
1,3 |
| ratio |
10 : 1 |
| cone distance min./max. |
0 - 108 mm |
| min/max. pitch cone angle |
5°42' - 84°18' |
| cutter speeds |
30 - 87 m/min |
| feed |
4,2 - 69,2 m/min |
| main drive motor |
3,7 kW |
| Control |
Fanuc 0-GC |
| total power requirement |
5 kW |
| weight of the machine ca. |
7 t |
| Description |
- CNC Control Fanuc 0-GC
- Set of Change Gears For Speed, Feed and Roll, Index and Ratio Roll
- Hydraulic Double-Acting Chucking Mechanism (Less Draw-in-Bar and Nut)
- Self-Contained Hydraulic System
- Self-Contained Coolant System
- Workhead Brake
- Full Guards Cover
- Full Compliment of Electrics (Motor/Controls)
SPECIFICATIONS:
Cone Distance: 0 to 4-1/2"
Pitch Angle: 84 deg. 18 min. (max); 5 deg. 42 min. (min)
Extreme Ratio: 10-to-1
Pitch Diameter: 10-to-1 ratio; 8-1/2" (max)
Pitch Diameter: 1-to-1 ratio; 6" (max)
Diametral Pitch (coarsest): 3 DP
Diametral Pitch (finest): 20 DP
Face Width: 1-3/8" (max)
Index Range: 9 to 93 inclusive, and most numbers up to 175
Pressure Angles: 20, 22-1/2 & 25 deg.
Diameter of Taper Hole at Large : 3-29/32"
Taper per Foot: 39/64"
Depth of Taper: 6"
Diameter of Hole Through: 2-7/16"
Spindle Nose to Machine Center: 1-1/2" to 9"
Cutter Speeds: 98 to 286 (feet per minute)
Feeds: 4.2 to 69.2 (seconds per tooth)
|
|
|
|
