| Stock-No. |
1020-21016 |
| Category |
Double Column Drawing Press - Mechanical |
| Make |
FAGOR |
| Type |
TSE2-1000-4000-1600 |
| New in |
2025 |
| Control |
SIEMENS S7-1500F |
| Location |
ab Lager - demontiert |
| Origin |
Spain |
| Delivery time |
according to the arrangement |
| Freight basis |
ex location |
| Price |
| pressure |
1000 t |
| distance between columns |
4250 mm |
| stroke |
400 mm |
| Control |
SIEMENS S7-1500F |
| table dimension - longitudinal |
4000 mm |
| table dimension - cross |
1600 mm |
| total power requirement |
200 kW |
| weight of the machine ca. |
250 t |
| dimensions of the machine ca. |
7,5 x 4,8 x 7,4 m |
| Description |
This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!
DESCRIPTION:
New transfer press! Stored and never assembled.
COMPLETE with electronic beam transfer 0 - 800 mm
Transfer step and 500-1300 mm
Distance between transfer beams. Lifting stroke = 0-150 mm.
2 x T-shaped sliding table, extendable.
Total tool weight max. 20,000 kg, upper part max. 10,000 kg.
Ram weight compensation by means of compressed air cylinder.
Automatic pressure adjustment with setpoint specification from the tool memory.
Lubrication: Main bearings and gear wheels are continuously supplied by the
circulating lubrication system.
LED tool room lighting. 2 auxiliary control panels, scrap deflectors,
press force measuring device, vibration elements manufactured by KTI.
Technical data:
Frame design: Transfer press
Drive type: Mechanical
Window in side stand: Yes
Through-hole in table: Yes
Sliding table: Yes
Number of tables: 2
Press forces
Total nominal force: 1000 tonnes
Press table
Clamping surface (left-right) 4000 mm
Clamping surface (front-rear) 1600 mm
Height above floor: 600 mm
Automatic tool clamping device: yes
Ram
Stroke: 400 mm
Ram (mechanical press)
Ram adjustability: 300 mm
Stroke rate: min. 8 /min
Max. stroke rate: 50 /min
Hydraulic overload protection: yes
Tool installation dimensions
Tool installation height (stroke down, adjustment 766 mm
Distance between uprights (left-right) 4250 mm
Free passage at the side (width) 1800 mm
Tool weight max. 20,000 kg
Transfer system
Closed gripper rail inner width max. 500 mm
Open gripper rail inner width max. 1,300 mm
Electrical connection data
Power consumption (total): 200 kW
Connected load: 350 kVA
Connection voltage: 400 V
Mains frequency: 60 Hz
Dimensions / weights
Space requirement length: 7500 mm
Space requirement width: 4800 mm
Height above floor: 7360 mm
Height below floor: 4000 mm
Total weight approx.: 250000 kg
Additional equipment for presses
Light barrier: yes
Cutting impact damping: yes
Automatic tool clamping device: yes
Hydraulic overload protection: yes
Transfer device: yes
|
|
|
|
